If you own an Epson printer, you may have encountered a common issue where the printer stops working due to a “waste ink pad” reaching its limit. This can be frustrating, but don’t worry because there is a solution – resetting the waste ink pad.
The waste ink pad is a sponge-like material located inside your printer that absorbs excess ink during the printing process. Over time, this pad can become saturated, leading to error messages and printer malfunctions. Rather than replacing the pad, which can be costly and time-consuming, you can reset it yourself.
To begin the reset process, make sure your printer is turned off and unplugged from the power source. Next, locate the waste ink pad – it is typically found in the bottom of the printer. Carefully remove any screws or clips that hold the pad in place, taking note of their positions for reassembly.
Once the waste ink pad is removed, you will need to wash it thoroughly. Use warm water and a mild detergent to gently scrub the pad until all the ink is removed. Be sure to rinse it well and allow it to dry completely before reinserting it into the printer.
After the pad is clean and dry, carefully place it back into its original position inside the printer. Reattach any screws or clips that were removed earlier. Finally, plug the printer back into the power source and turn it on.
With the waste ink pad reset, your Epson printer should now be ready to resume printing. Remember to regularly check the pad’s ink levels and clean it if necessary to avoid any future issues.
In conclusion, resetting the waste ink pad of your Epson printer can save you time and money. By following these steps, you can continue to enjoy high-quality prints without any interruptions caused by a saturated waste ink pad.
Download Epson ET-1113 Resetter
– Epson ET-1113 Resetter For Windows: Download
– Epson ET-1113 Resetter For MAC: Download
How to Reset Epson ET-1113
1. Read Epson ET-1113 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson ET-1113 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson ET-1113 off then on
5. Check Epson ET-1113 Counter
How To Reset Epson Printer “waste ink pad” on Youtube
– Video How To Reset Epson Printer “waste ink pad” on YouTube, as of the current time, has received 114497 views with a duration of 1:56, taken from the YouTube channel: youtube.com/@Automated.
Buy Wicreset Serial Key For Epson ET-1113
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien