If you own an Epson printer, you might encounter an error stating “waste ink pad is full” at some point. This error usually occurs when the printer’s waste ink pad is saturated with ink, which can happen after extended use. When this happens, the printer won’t function properly and needs to be reset. Here’s a step-by-step guide on how to reset your Epson printer’s waste ink pad:
1. Before you begin, make sure your printer is powered off and disconnected from the computer.
2. Locate the two buttons on your printer that are responsible for resetting the waste ink pad. These buttons can vary depending on the model, so consult your printer’s user manual or Epson’s website for instructions specific to your model.
3. Press and hold the two buttons simultaneously. While still holding them, power on the printer.
4. Release the buttons once the printer’s LCD screen displays a message saying “Initialization” or “Maintenance mode.”
5. Once the printer has entered maintenance mode, you can navigate through the menu using the arrow buttons on the printer. Look for the “Waste ink pad counter” or a similar option.
6. Select the option to reset the waste ink pad counter, then press the “OK” or “Enter” button on the printer.
7. Power off the printer, then power it back on. The waste ink pad should now be reset, and the error message should no longer be displayed.
By following these steps, you can easily reset your Epson printer’s waste ink pad and ensure that it continues to function smoothly. However, it’s important to note that resetting the waste ink pad is a temporary solution, and you may need to consider replacing or cleaning the pad if the issue persists. Consult an Epson service center for further guidance.
Download Epson XP-435 Resetter
– Epson XP-435 Resetter For Windows: Download
– Epson XP-435 Resetter For MAC: Download
How to Reset Epson XP-435
1. Read Epson XP-435 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson XP-435 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson XP-435 off then on
5. Check Epson XP-435 Counter
How To Reset Epson Printer “waste ink pad” on Youtube
– Video How To Reset Epson Printer “waste ink pad” on YouTube, as of the current time, has received 114513 views with a duration of 1:56, taken from the YouTube channel: youtube.com/@Automated.
Buy Wicreset Serial Key For Epson XP-435
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien