Ink waste pads are an essential component of Epson XP series printers that trap excess ink during the printing process. Over time, these pads can become saturated with ink and need to be cleaned or replaced to maintain optimal printer performance. In this article, we will guide you through the steps to clean ink waste pads on your Epson XP series printer.
First, ensure that your printer is turned off and unplugged from the power source to avoid any electrical mishaps. Place an old towel or paper underneath the printer to catch any ink drips during the cleaning process.
Next, locate the ink waste pads, which are usually located on the right side of the printer. Gently remove them from their position and rinse them under warm water to remove any excess ink. Be careful not to apply too much pressure or scrub the pads vigorously, as this can damage them.
Once the pads are clean, leave them to air dry for a few hours or until completely dry. In the meantime, clean the printer’s ink cartridge and printhead to ensure thorough maintenance.
After the pads are dry, carefully reinsert them back into their original positions in the printer. Ensure they fit securely and snugly without any gaps.
Finally, turn on your printer and run a nozzle check or printer head alignment test to ensure that everything is functioning correctly. If the ink waste pads were cleaned effectively, your printer should now be ready to resume printing with optimal performance.
Regularly cleaning ink waste pads is essential to prevent ink spills and smudging on your prints and to ensure the long-term durability of your Epson XP series printer. By following these steps, you can effectively clean the ink waste pads and extend the lifespan of your printer.
Download Epson XP-432 Resetter
– Epson XP-432 Resetter For Windows: Download
– Epson XP-432 Resetter For MAC: Download
How to Reset Epson XP-432
1. Read Epson XP-432 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson XP-432 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson XP-432 off then on
5. Check Epson XP-432 Counter
How To Clean Ink Waste Pads On Epson XP Series Printers on Youtube
– Video How To Clean Ink Waste Pads On Epson XP Series Printers on YouTube, as of the current time, has received 52970 views with a duration of 4:03, taken from the YouTube channel: youtube.com/@BillOfAllTrades2016.
Buy Wicreset Serial Key For Epson XP-432
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien