If you’re experiencing issues with your Epson printer, it may be necessary to reset it. Resetting your printer can help resolve various problems, such as error messages, paper jams, or network connectivity issues. Here are some steps on how to reset your Epson printer:
1. Check the printer: Before resetting your Epson printer, ensure that there are no paper jams or any other visible issues. Also, make sure the printer is connected to a power source and turned on.
2. Power off: Press the power button on your Epson printer to turn it off. Wait for a few seconds before proceeding to the next step.
3. Disconnect all cables: Unplug all the cables from the back of the printer, including the power cable, USB cable (if connected), and any other cables.
4. Wait: Wait for about 5-10 minutes to allow the printer to fully power down. This will help clear any temporary glitches or conflicts that may be causing the issue.
5. Reconnect cables: Plug in all the cables you removed in step 3, ensuring they are properly connected and secured.
6. Power on and reset: Press the power button to turn on your Epson printer. While the printer is turning on, simultaneously press and hold the reset button (if available) for a few seconds until you see the reset process.
7. Configuration settings: After the reset process completes, you may need to reconfigure some printer settings, such as network connections or paper tray settings.
By following these steps, you should be able to reset your Epson printer effectively. However, if the issues persist, it’s recommended to consult the user manual or contact Epson support for further assistance. Remember to always perform regular maintenance and keep your printer’s firmware up to date to minimize potential printer problems.
Download Epson S20 Resetter
– Epson S20 Resetter For Windows: Download
– Epson S20 Resetter For MAC: Download
How to Reset Epson S20
1. Read Epson S20 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson S20 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson S20 off then on
5. Check Epson S20 Counter
How to reset Epson printer | How to reset printer on Youtube
– Video How to reset Epson printer | How to reset printer on YouTube, as of the current time, has received 42067 views with a duration of 2:22, taken from the YouTube channel: youtube.com/@techininfo1369.
Buy Wicreset Serial Key For Epson S20
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien