If you are facing the issue of a “waste ink pad” error on your Epson printer, resetting it can help resolve the problem. The waste ink pad is an absorbent mat inside the printer that collects waste ink during the printing and cleaning process. Over time, this pad gets saturated, resulting in an error and the printer may refuse to print until the pad is replaced or reset.
To reset the waste ink pad, you can follow these steps:
1. Turn off the printer and unplug it from the power source.
2. Locate the waste ink pad, which is typically found at the bottom of the printer.
3. Remove the waste ink pad, ensuring you do it carefully to avoid any damage. If necessary, consult the printer’s manual or Epson’s support website for guidance specific to your model.
4. Clean the waste ink pad by rinsing it under running water until the ink is completely washed off. You can also use a mild detergent if needed. Allow it to dry completely before reinstalling.
5. Once the pad is dry, carefully reinsert it back into the printer.
6. Plug in the printer and turn it on while holding down the “Maintenance” or “Paper” feed button. Release the button when the power indicator starts blinking.
7. Wait for a few seconds as the printer resets. Afterward, the blinking light should stop, indicating that the waste ink pad has been successfully reset.
8. Test the printer by printing a page to ensure it is functioning properly.
Resetting the waste ink pad should enable your Epson printer to resume printing tasks without any issues. However, if the error persists, it is recommended to contact Epson’s customer support for further assistance.
Download Epson XP-631 Resetter
– Epson XP-631 Resetter For Windows: Download
– Epson XP-631 Resetter For MAC: Download
How to Reset Epson XP-631
1. Read Epson XP-631 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson XP-631 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson XP-631 off then on
5. Check Epson XP-631 Counter
How To Reset Epson Printer “waste ink pad” on Youtube
– Video How To Reset Epson Printer “waste ink pad” on YouTube, as of the current time, has received 114513 views with a duration of 1:56, taken from the YouTube channel: youtube.com/@Automated.
Buy Wicreset Serial Key For Epson XP-631
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien