If you own an Epson Stylus printer and are facing issues with it, such as the lights blinking or other technical glitches, resetting it might be a solution. Here is a step-by-step guide on how to reset your Epson Stylus printer when the lights are blinking:
1. Turn off the printer: Start by turning off the power button and unplugging the printer from the power source. Wait for a few minutes to allow the printer to cool down.
2. Check for paper jams: Open the printer cover and inspect for any paper jams. Remove any stuck paper carefully to avoid any damage.
3. Reset ink cartridges: If you have recently replaced the ink cartridges and the lights are blinking, remove them and reinstall them correctly. Make sure they are securely inserted in their respective slots.
4. Perform a soft reset: Press and hold the power button for a few seconds while connecting the printer back to the power source. This will perform a soft reset and clear any minor glitches in the system.
5. Reset via software: If the above steps didn’t resolve the issue, you can try resetting the printer using Epson printer software. Download and install the software from the official Epson website. Open the software and select the printer model. Look for the “Maintenance” or “Options” tab and click on “Reset” or “Factory Default” to initiate the reset process.
Remember, every printer model might have slight variations in the reset process, so it’s important to refer to the printer’s user manual or visit Epson’s official website for specific instructions. By following these steps, you can potentially reset your Epson Stylus printer and get it back to working properly, resolving any blinking light issues you may be experiencing.
Download Epson Photo 1290 Resetter
– Epson Photo 1290 Resetter For Windows: Download
– Epson Photo 1290 Resetter For MAC: Download
How to Reset Epson Photo 1290
1. Read Epson Photo 1290 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson Photo 1290 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson Photo 1290 off then on
5. Check Epson Photo 1290 Counter
How to Reset Epson Stylus Printer ( Light Blinking ) on Youtube
– Video How to Reset Epson Stylus Printer ( Light Blinking ) on YouTube, as of the current time, has received 26100 views with a duration of 1:18, taken from the YouTube channel: youtube.com/@Ready4Education.
Buy Wicreset Serial Key For Epson Photo 1290
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien