Is your Epson printer showing the “waste ink pad” error message? Don’t worry, it is a common issue that can be easily fixed by resetting the printer’s waste ink pad. The waste ink pad is a sponge-like material located deep inside the printer and collects the waste ink during the printing process. Over time, this pad becomes full and needs to be reset to ensure proper functioning of the printer. Here’s a step-by-step guide on how to reset the waste ink pad on your Epson printer:
1. Start by turning off the printer and disconnecting the power cable. Wait for a few minutes to let the printer cool down.
2. Next, press and hold the power button while reconnecting the power cable. Continue holding the power button until the printer starts.
3. Once the printer starts, release the power button and wait until it is fully initialized. The printer will display a message indicating that it is in a maintenance mode.
4. Now, download and install the Epson Waste Ink Pad Reset utility from the official Epson website. This utility will help you reset the waste ink pad counter.
5. Open the utility and select your printer model from the provided list. Then, click on the “Reset” button to start the process.
6. The utility will reset the waste ink pad counter and display a message confirming the successful reset. You can now close the utility and restart your printer.
By following these simple steps, you can reset the waste ink pad on your Epson printer and resolve the error message. However, it is important to note that resetting the waste ink pad only clears the error message and does not physically clean the ink pad. For optimal printer performance, it is recommended to clean or replace the waste ink pad periodically.
Download Epson RX650 Resetter
– Epson RX650 Resetter For Windows: Download
– Epson RX650 Resetter For MAC: Download
How to Reset Epson RX650
1. Read Epson RX650 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson RX650 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson RX650 off then on
5. Check Epson RX650 Counter
How To Reset Epson Printer “waste ink pad” on Youtube
– Video How To Reset Epson Printer “waste ink pad” on YouTube, as of the current time, has received 114510 views with a duration of 1:56, taken from the YouTube channel: youtube.com/@Automated.
Buy Wicreset Serial Key For Epson RX650
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien