If you own an Epson printer, you may have encountered a common issue that occurs once the printer’s “waste ink pad” reaches its limit. When this happens, your printer will stop functioning until the waste ink pad is reset. However, resetting the waste ink pad is not as complicated as it may sound. In this article, we will guide you on how to reset your Epson printer’s waste ink pad.
Firstly, make sure your printer is turned on and connected to your computer. Then, download and install the Epson Resetter software from the official Epson website. Once the software is installed, run it and select your printer model from the list.
Next, click on the “Waste ink pad counter” tab, and a dialogue box will appear. Here, you will find information about the current ink pad status. To reset the waste ink pad, simply click on the “Initialization” button. You may be prompted to enter a unique code specific to your printer model.
After entering the code, click “OK,” and the reset process will begin. Once completed, a message will appear confirming the successful reset of the waste ink pad. You can now close the Epson Resetter software and restart your printer.
It is important to note that resetting the waste ink pad does not physically remove the ink that has accumulated. It only resets the printer’s internal memory and allows you to continue using it. To ensure the longevity and proper functioning of your printer, it is advisable to have the waste ink pad physically cleaned or replaced by an authorized Epson service center when necessary.
In conclusion, resetting your Epson printer’s waste ink pad is a straightforward process that can be done using the Epson Resetter software. Following the steps outlined above will allow you to quickly resolve the “waste ink pad” issue and resume printing with your Epson printer.
Download Epson SX230 Resetter
– Epson SX230 Resetter For Windows: Download
– Epson SX230 Resetter For MAC: Download
How to Reset Epson SX230
1. Read Epson SX230 Waste Ink Pad Counter:
If Resetter shows error: I/O service could not perform operation… same as below picture:
==>Fix above error with Disable Epson Status Monitor: Click Here, restart printer/computer and then try again.
2. Reset Epson SX230 Waste Ink Pad Counter
Buy Wicreset Serial Key
3. Put Serial Key:
4. Wait 30s, turn Epson SX230 off then on
5. Check Epson SX230 Counter
How To Reset Epson Printer “waste ink pad” on Youtube
– Video How To Reset Epson Printer “waste ink pad” on YouTube, as of the current time, has received 114510 views with a duration of 1:56, taken from the YouTube channel: youtube.com/@Automated.
Buy Wicreset Serial Key For Epson SX230
Contact Support:
Mobile/ Whatsapp: +0084 915 589 236
Telegram: https://t.me/nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien